Features of Corelite hollow core kiln shelves:

LIGHTER:
Less back strain and fatigue
Lower firing costs
Lower shipping cost
FLATTER:
Each shelf is ground top and bottom for perfect flatness
Ware keeps its shape while firing, especially tile

STRONGER:
Less warpage
Less likely to crack
More firing cycles

Maximum Working Temperature: 2336 degrees F

NOTE: DO NOT put molds or insulating material on the shelf. This may cause the shelf to crack, due to uneven heating and cooling ThinFire shelf paper is OK. Glass must cover over 1/2 of the total surface area to avoid thermal stress on the edge of the shelf. A heating rate of no faster than 200 degrees per hour and a hold of at least 1 hour at 1000 degrees, during ramp up and cool down is suggested, to relieve thermal stress on glass.

Any shape or size is available by special order with standard thicknesses of 5/8 inches, 3/4 inches, 7/8 inches and 1 inch.

DUE TO WEIGHT AND SIZE OF THIS PRODUCT, AN INCREASED SHIPPING FEE MAY BE APPLIED. WE WILL NOTIFY YOU BY PHONE AND OR EMAIL TO INFORM YOU OF ANY ADDITIONAL CHARGES.