The Pearl-22 top lifts away to give access to the shelf area. Air pistons assist in lifting the top. You can place the Pearl on a table without an extra stand.

The elements in the top are mounted in pinless element grooves. Since the groove opening is narrower than the element coil, the elements stay in place without pins. This is one more reason your Pearl-22 will give you hassle-free firing. Enjoy the improved heat distribution of a side element, which is mounted in the top section of the kiln sidewalls.

Electrical components are mounted inside the base of the kiln. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life. The Pearl-22 uses the digital 12-key Sentry 2.0 controller.

A mercury relay is standard on this kiln. The relay sends power to the elements on command from the digital controller. The mercury relay in the Pearl-22 is industrial-grade and far outlasts mechanical relays. The life of the quiet, reliable mercury relay has been measured in millions of on/off cycles.

You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. The sealed touch pad keeps out dust and is easy to wipe clean.

The firing chamber is 22 inches wide x 22 inches deep x 13 inches high.

A fiber top and stand, with or without casters are available as add-on options.

This kiln qualifies for $149 flat rate shipping within the the continental United States and includes residential delivery and lift gate service when needed. Your phone number must be provided for delivery notification. Delivery does not include uncrating or kiln setup and placement. Additional rare restrictions may apply.

Add-on items :

Fiber Top
Stand
Stand with Casters